9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
-
Be careful that the right restriction is installed in the right place and the right way up.
-
The following parts are installed:
a. Ball (922), traction valve 30; diameter 6 mm.
b. Restriction (91 6/II), clutch C
c. Restriction (640/I), clutch E
d. Restriction (908/II), brake band C'
e. Restriction, (750/I), accumulator C'1
f.
Restriction (830/I), time control valve
g. Restriction (912/II), brake band C1
2. Install the lower part of the valve body.
NOTE: Remember that the lower part of the valve body must not lifted after it has been placed on the valve body.
3. Grip the valve body and turn it upside down.
-
The parts of the valve body must not slide apart.
4. Install the two balls.
a. Ball, throttle pressure valve, shifting 1-2; diameter 4 mm.
b. Ball, throttle pressure valve, shifting 2-3; diameter 4 mm.
