9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
5. Assemble and install the second gear's synchromesh on the second gear's gear wheels.
-
Install the bearing sleeve in the second gear's gear wheel and install the entire unit in the sleeve and the synchromesh hub.
-
The heels on the baulk ring should install in the notches in the synchromesh hub.
6. Hold down the gear wheels and change gears as a test.
7. Install the output assembly tool over the synchromesh unit so that it does not fall apart during the assembly.
