9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Alarm Module: Service and Repair
Electronic Control Module
1
Car without passenger airbag
Remove the glove box and air distribution flap.
Car with passenger airbag
Remove the complete airbag, including bracket and air distribution flap.
2
Carefully press the air duct upwards on the passenger's side.
3
Drill out the pop rivet securing the control module. Use a drill with a bit stop.
4
Remove the two control module retaining screws (from below). Lift out the control module.
5
Unplug the electronic control module connector.
6
Install in reverse order.