saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 5474 > < Diagram Information and Instructions|Page 5472
Page 1
background image

Trailer Lamps: Description and Operation

All cars are electrically prepared for the fitting of a towbar. For this purpose, 8-pin connector 258 (H8-5) is installed in the luggage compartment on the
left-hand side under the left-hand rear light.

Current is supplied via connector 258 (H8-5) to the following lights on the trailer:

Pin 1

Brake lights 30 (from brake lights switch 29).

Pin 2

Rear light 14, right-hand side, and number plate lighting 15 (from lights switch 10 and fuse 29).

Pin 3

Direction indicators 28, right-hand side (from flasher relay 23).

Pin 4

Direction indicators 27, left-hand side (from flasher relay 23).

Pin 5 and 8

Rear fog light 33 (from rear fog lights switch 161).

Pin 6

Rear light 14, left-hand side (from lights switch 10 and fuse 30).

The grounding cable from the towbar's electrical connector must be connected to rear grounding point G3 on the car, using a separate ring cable
terminal.

Diagram Information and Instructions|Page 5474 > < Diagram Information and Instructions|Page 5472