9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Brake Caliper: Service and Repair
Rear
Replacement
Removal
1. Lift the car and remove the rear wheel.
2. Release the handbrake.
3. Disconnect the handbrake cable from the lever on the hydraulic body.
4. Remove the adjusting screw's threaded plug.
-
Unscrew the adjusting screw.
5. Depress the brake pedal slightly by means of a brake pedal clamp to prevent brake fluid from running out.
6. Slacken the brake hose union on the hydraulic body.
7. Remove the covers from the guide pins and unscrew the pins.
-
Use a 7 mm Allen key.
8. Remove the retaining clip.
9. Lift off the hydraulic body and remove the brake pads.
10. Rotate the hydraulic body to unscrew the brake hose from it.
-
Install a dust cap on the brake hose and on the hose installing on the hydraulic body.
Installation