9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Brake Hose/Line: Service and Repair
Brake Pipe
Removal
1. Clean the connections of the damaged brake pipe.
2. Unscrew the brake pipe's union nuts and other retaining clips, if any.
3. Insert plastic plugs into the open connections and remove the damaged brake pipe.
Installation
WARNING: Brake pipes should not be bent or strained after installation.
1. Clean the inside of the new brake pipe by blowing compressed air through it.
2. Position the pipe, remove the plastic plugs and tighten the connecting nuts.
3. Bleed the brake system.
NOTE: The procedure for changing brake hoses is the same as for changing brake pipes.