saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Removing|Page 4789 > < Removing
Page 2
background image

7

Detach the electrical distribution box and move it down.

8

Remove the ashtray.

9

Bend down the two upper retaining lugs and pull forward the ashtray holder. Unplug cables from cigarette lighter and ashtray light.

10

Pull the steering wheel as far forward as possible.

11

Remove steering wheel.

12

Remove the protective covers from the steering column.

13

Remove covers and remove instrument panel screws.

14

Cars with manual gearbox: 
Engage reverse. 
Remove screw under gear lever gaiter. 
Cars with automatic transmission: 
Remove plug and screw securing gear selector cover.

15

Remove the center facia vent and air duct. Standard and standard with A/C: 
Detach the control panel by pressing in the four securing lugs and pulling it into the cabin. Detach the air distributor rod, the temperature control
damper gear and all connectors (make sure that the temperature control is in position 0).
ACC:
Pull forward the ACC control module. Unplug the connector and ground cable. Cut the cable tie securing the wiring.

16

Detach the outer facia vent from the instrument panel.

17

Unplug connectors from switches and clock. Mark connectors to make it easier to reinstall them. Lift off the instrument panel.

18

Dismantle the selector switch. Mark connectors to make it easier when reinstallation them.

19

Remove screws from combined instrument.

Removing|Page 4789 > < Removing