saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Air Leakage, Sealing|Page 4810 > < Air Leakage, Sealing|Page 4808
Page 2
background image

7. Detach the electrical distribution box and move it down.
8. Remove the ashtray.
9. Bend down the two upper retaining lugs and pull forward the ashtray holder. Unplug cables from cigarette lighter and ashtray light.

10. Pull the steering wheel as far forward as possible.
11. Remove steering wheel. See group 6, section 641.
12. Remove the protective covers from the steering column.
13. Remove covers and remove instrument panel screws.
14. Cars with manual gearbox: Engage reverse. Remove screw under gear lever gaiter. Cars with automatic transmission: Remove plug and screw

securing gear selector cover.

15. Remove the centre facia vent and air duct.

-

Standard and standard with A/C:
Detach the control panel by pressing in the four securing lugs and pulling it into the cabin. Detach the air distributor rod, the temperature
control damper gear and all connectors (make sure that the temperature control is in position 0).

-

ACC:
Pull forward the ACC control module. Unplug the connector and ground cable. Cut the cable tie securing the wiring.

16. Detach the outer facia vent from the instrument panel.

Air Leakage, Sealing|Page 4810 > < Air Leakage, Sealing|Page 4808