9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Adjusting/Fitting
1. Install the O-ring on the dowel and install dowel in housing.
-
Some versions have two O-rings.
2. Screw in the adjusting screw.
-
Tightening torque: 10 Nm (88 inch lbs.)
3. Mark both the adjusting screw and gear case.
4. Back off the adjusting screw two turns.
5. Install the nut.
-
Hold the adjusting screw while tightening the nut.
-
Wrench size = 22 mm.
Tightening torque: 50 Nm (37 ft. lbs.)
6. Install valve body and valve body cover.