9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
j.
Spring, accumulator, clutch E
k. Spring, accumulator, clutch E
l.
Spring cup, accumulator, clutch E
m. Spring, system pressure valve
n. Spring, system pressure valve
o. System pressure valve
3. Press in the time control valve with one finger and remove the clip using a screwdriver, then remove the valve and the small spring.
4. Remove the clip from clutch C'.
-
Remove the valve.
5. Remove the clip from clutch E.
-
Remove the valve.
6. Remove the other cover from the middle section of the valve body, 5 screws.
-
Hold the cover with your hand so that it does not fly off as there are several springs on the inside.
-
On models with turbocharger, be careful not to damage the gasket.