9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
The "SET" button is used for setting (press for 2 seconds) and erasing (press for 4 seconds) parameters. After 2 seconds the figures will start flashing
and after 4 seconds they will all turn to 0 and flashing will stop.
As before, the "R" and "INFO" buttons are used for controlling the Electronic Display Unit (EDU) but the "INFO" button also has an Saab Car
Computor (SCC) function. With the ignition switched off, the clock function in the SCC is activated by pressing the "INFO" button. The time will be
shown as long as the button is pressed.
When the ignition is switched on, "SAAB" will appear briefly in the display.
Functions
DIST TO DEST
Counts down a preset distance. The arrival time (in ARRIVAL) is calculated at the same time on the basis of actual average speed and distance covered.
When DIST TO DEST is set, the AVER SPEED and ARRIVAL functions are automatically reset to zero,
AVER SPEED
This function shows average speed calculated from the last time it was reset (current speed is shown for the first 500 metres). Resetting to zero takes
place automatically when the DIST TO DEST function is set or it can be reset manually, see under "Directions for use" below.
