9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
The button set for memory and memory programming operation consists of four buttons. Three memory buttons, "1", "2" & "3", and also a memory
programming button "M". The seat adjustment is stored in the memory in the following way:
-
Position the seat in the desired position using the regular switch.
-
Store the adjustment position pressing the "M" button and one of the memory buttons "1", "2" or "3" at the same time.
-
To recall the stored adjustment position press and hold the selected memory button until the desired seat position is achieved.
The electronic control module is supplied with voltage from +30 via a fuse 25 (LHS) and fuse 26 (RHS). The motors, switch and position sensors
(potentiometers) are supplied with voltage from the electronic control module.
The electronic control module constantly reads the switches and then selects an appropriate combination of switches and the electronic control module
carries out the corresponding operations. When the motors are activated, the electronic control module regulates the current consumption of each motor
and checks the seat position via the position sensors.
The position sensors are potentiometers fitted on the particular motor shaft.
