saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Door Seals - Re-attaching|Page 6125 > < Spoilers, Flaps, and Air Dams|Adjustments
Page 1
background image

Weatherstrip: All Technical Service Bulletins
Door Seals - Re-attaching

CATEGORY 
Body

SECTION 
8

PAGE 
69

ISSUE 
06/93-0344

CODE 
844

Supersedes S.I. 05/87-961

Subject:
Attaching Door Seals

Application:
9000

Beginning with 1993 model year production, double-sided tape is now used for attaching the door seals. This double-sided tape supersedes the clips used
on earlier model vehicles and can be used on any 9000 model.

Cars Affected:

9000 models

Parts:

Double-sided tape

43 05 777*

*NOTE: 

Seven pieces of tape, each 220 mm long are required per door.

 This part number provides enough tape for one door.

Action:

Should you have a customer complain of a loose or sagging door seal, fit the double-sided tape as indicated below:

1.

Remove the seals installed on the door openings.

2.

Clean the sheet metal flange with mineral spirits to make certain you provide a clean surface to which the tape can adhere.

3.

Fit the double-sided tape as indicated in Figure 1.

Door Seals - Re-attaching|Page 6125 > < Spoilers, Flaps, and Air Dams|Adjustments