9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Before reinstalling the brake disc, check that its surface in contact with the hub is free from rust, burrs and the like.
Use a scraper, chisel, file or the like to clean the brake pad contact surfaces in the carrier frame.
-
Wash the brake disc to clean it.
1. Position the brake disc and install the locating stud.
2. Install the brake pads.
3. Remove the adjusting screw's threaded plug.
-
Tighten the adjusting screw all the way in and then back it off a 1/4-1/2 turn.
-
Check that the brake disc can rotate freely.
4. Install the adjusting screw's threaded plug.
5. Install the wheels and tighten the wheel bolts, using a torque wrench.
-
Tighten to: 120 Nm (89 ft lb)
