9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
2. Undo the connector from the Electronic Control Unit (ECU).
3. Plug the connector of the breakout box into the Antilock Brake System (ABS) Mark IV connector for the ECU.
-
Connect wiring looms 1 (pins 1, 34 and 15) and 2 (pins 18, 36, 21 and 2) (part no. 86 11 212).
-
Connect pin 1 when the ignition is switched on.
-
Run the pump for one minute.
-
Connect the battery terminal twenty seconds after the pump has started up so that the outlet valves are opened.
-
Disconnect the battery terminal after a further twenty seconds.
-
Disconnect pin 1 sixty seconds after the pump has started up.
-
Switch off the ignition.
-
Bleed the system using the bleeder unit (part No. 88 19 096)
