saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Brake Caliper > < Without ABS System|Page 3899
Page 6
background image

-

Bleeding must be carried out in the following sequence:

Right-hand front wheel
Left-hand rear wheel
Left-hand front wheel
Right-hand rear wheel.

-

When changing the brake fluid, the contents of the brake fluid reservoir must be siphoned off and each brake caliper must be drained of the
amount of fluid indicated in the figure.

4. Plug in the connector of the ECU.

5. Turn on the ignition and check that the Antilock Brake System (ABS) warning light on the facia goes out.

Brake Caliper > < Without ABS System|Page 3899