9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Removal
1. Unplug the connector from the brake fluid reservoir's filler cap.
2. Lift off the main fuse box for the Antilock Brake System (ABS) and move it aside.
3. Empty the reservoir.
-
The easiest way to do this is to remove the brake fluid by suction using the brake system bleeder unit, part No. (16) 88 19 096.
NOTE: It will only be possible to siphon off the brake fluid from one of the chambers.
4. Lift the brake fluid reservoir diagonally upwards to detach it from its mounting.
5. Tilt the reservoir so that the brake fluid in the other chamber runs over to the chamber from which it is possible to siphon off the brake fluid.
-
Use the brake system bleeder unit to suck out the rest of the brake fluid.
6 Disconnect the hoses and plug them.
Installation
