saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Brakes - Hard Pedal Effort When Starting a Cold Engine|Page 4122 > < Brakes - Hard Pedal Effort When Starting a Cold Engine|Page 4120
Page 10
background image

1.

Refit all parts except the fuse box cover.

2.

Connect the battery cables.

3. Refit fuse no. 4 (10 A) (vacuum pump).

Refit fuse no. 2 (15 A) (fog light). 
Refit fuse no.10 (7.5 A) (headlight wipers).

4.

Without starting the engine, turn the key to the ignition "On" position. Check that relay F2 activates and that the vacuum pump functions (see note
below).

Note

Place your finger on relay F2 during the test if the operation is difficult to hear due to background noise. Due to its capacity, the vacuum pump will
only operate for a few seconds. If you pump the brake pedal several times with the engine off and the key in the ignition on position, the pump will
cycle again.

5.

Check that the headlight wipers and the fog light function correctly.

6.

Refit the fuse box cover.

Brakes - Hard Pedal Effort When Starting a Cold Engine|Page 4122 > < Brakes - Hard Pedal Effort When Starting a Cold Engine|Page 4120