saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Radiator Cooling Fan Motor Relay > < Radiator Cooling Fan Motor|General|Page 1746
Page 1
background image

Radiator Cooling Fan Motor: Service and Repair
Auxiliary Fan

1.

Disconnect battery ground cable.

2.

Remove front spoiler and grill.

3.

Remove screws from tops of radiator support member bars, then the lower radiator support member attaching screws.

4.

Remove light cluster retaining screw and pull light forward slightly.

5.

Remove headlights, then ignition coil attaching screws. Position coil out of the way.

6.

Remove cooler battery to radiator support attaching screw.

7.

Remove radiator support attaching bolts, then unplug horn electrical connectors.

8.

Lift out radiator support and position aside.

9.

Remove cooling fan retaining nut and screws.

10.

Reverse procedure to install.

Radiator Cooling Fan Motor Relay > < Radiator Cooling Fan Motor|General|Page 1746