9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Oil Pan: Service and Repair
Removal
1. Remove the oil dipstick and stuff a rag into the end of the tube. Raise the car.
2. Drain the engine oil.
3. Remove the right front wheel and the front section of the fender liner.
4. Undo the bolts in the front and rear engine mountings.
5. Remove the Lambda sensor and the front section of exhaust pipe. Lower the car.
6. Snip through the ties and remove the tie rod between the wheel arch and subframe.
7. Install engine-lifting beam 83 93 977, or equivalent and raise the engine slightly.