9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
11.
When the new chain has been installed so that only a few links are still resting on the camshaft sprocket on the inlet side, protect the area
surrounding the chain with a cloth. Remove the old chain link and chain. (See Figure 7).
12.
Using a chain link, join the ends of the new chain together and pull the chain around until the link is midway between the legs of the chain support.
See Figure 7.
13.
Remove the chain link and fit a new chain lock.
Check that the inserts marked with a "2" are fitted in the tool. Then, place the plate of the chain link in the tool and fit it over the link on the chain.
Press the plate in place with a force of 10 N-m (7.4 ft.lb.).
See Figure 8.
14.
Reverse the insert in the press tool and position it with the V-notch straight above one of the pins of the link.
Using the press tool, peen overthe end of the pins using a force of 15 N-m (11 ft.lb.).
Repeat on the other pin of the link.
