saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Air Door Actuator / Motor, HVAC|Removal|Page 4774 > < Air Door Actuator / Motor, HVAC|Removal|Page 4772
Page 2
background image

7. Fit a new gear:

-

Fit shaft to gear in air distribution. Turn the gear so that the clips lock into the lugs on the heating and ventilation unit.

-

When fitting rod: Turn the shaft on the gear fully to the left. Set the air distribution control to position 0. Fit the rod with the orange colored
part towards the shaft on the control panel.

8. Press the control panel into position. Check operation.
9. Fit ashtray holder and ashtray.

10. Fit glove compartment and facia vent. If an airbag has been removed.

Air Door Actuator / Motor, HVAC|Removal|Page 4774 > < Air Door Actuator / Motor, HVAC|Removal|Page 4772