9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Control Assembly: Description and Operation
Panel Functions Front A/C
1.
AUTO button
Selects AUTO working mode, and the ACC control module maintains the apparent cabin temperature constantly at the desired level.
The LED lights in AUTO working mode and stays lit even when the electrically heated rear window, rear door fans and air recirculation flap are
manually activated and deactivated. In the case of other manual selections, the LED goes out.
The ACC system always starts in the AUTO working mode, provided it has not been otherwise programed.
2.
ECON button
Prevents activation of the A/C system and recirculation. Other functions are controlled automatically. The ECON LED lights.
3.
OFF button
Selects OFF working mode if the ACC system is running or if previous manual selections in the ACC system are already disconnected. When OFF
working mode is selected, the ACC control module continues to monitor temperature.
4.
Display
The display shows the selected temperature in the cabin. The display shows "HI" if the selected temperature is above +27 °C (81 °F) or "LO" if
the selected temperature is below +17 °C (63 °F).
When the ignition is switched on, the ACC system starts at the temperature that was programmed when the ignition was last switched off.
5.
°C/°F button
Switches display temperature to °C or °F.
6.
Temperature buttons
Increasing or decreasing desired cabin temperature. Set temperature shown on display.
