9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
8. Do up the three screws securing the evaporator casing.
9. Plug in connectors to the air recirculation flap motor, thermostatic switch and fan control module.
10. Fit new 0-rings to the A/C pipes and lubricate them using synthetic vaseline, part number (16) 30 15 286.
11. Place the A/C pipes in position on the expansion valve. Check that the pipes are correctly located in the holes and then tighten the PAD connector
to the expansion valve. Tightening torque: 17.5 Nm (12.8 ft lb).
12. Refit the A/C pipes in the holder beside the MacPherson strut.
13. Where fitted, refit the cruise control system pump.
14. Lower the clamp over the A/C lines.
15. Refit the vacuum connection to the intake manifold.
16. Refit the partition plate and press on the rubber strip.
17. Connect the drain hose and washer fluid hose to the cover and screw the cover over the bulkhead space.
18. Fill with refrigerant. For more information refer to "Draining and Filling of Refrigerant". See: Refrigerant/Service and Repair
