saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Air Leakage, Sealing|Page 5086 > < Air Leakage, Sealing|Page 5084
Page 3
background image

17. Unplug connectors from switches and clock. Mark connectors to make it easier to refit them. Lift off the instrument panel.
18. Dismantle the selector switch. Mark connectors to make it easier when refitting them.
19. Remove screws from combined instrument.
20. Remove acoustic insulation panels from under the facia. Remove panels from center console.
21. Remove left-hand and right-hand floor ducts.
22. Remove screws securing left-hand and right- hand side defroster ducts.
23. Cut the cable tie securing the wiring harness to the left-hand air duct (right-hand drive cars in right-hand air duct).
24. Unplug loudspeaker connections.
25. Remove screws securing the instrument panel and lift it out.
26. Detach cable tie from heater housing so that the electrical distribution box can be lifted down to the floor of the car.

27. Lift down the combined instrument.

CAUTION:  Protect the glass so that it is not scratched.

28. Remove the air duct and the left-hand and right-hand defroster vents.
29. Undo the screws and lift away the air duct which goes to the rear floor.
30. Unscrew the plastic holder securing the wiring loom under the heater housing.
31. Unplug connectors for servomotor, fan motor and blended air sensor (cars with ACC only).

Air Leakage, Sealing|Page 5086 > < Air Leakage, Sealing|Page 5084