saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Air Leakage, Sealing|Page 5093 > < Air Leakage, Sealing|Page 5091
Page 2
background image

1. Detach the negative lead from the battery.
2. Undo the fan housing and remove the heat exchanger. See separate description.
3. Remove the door trim seals from the A pillars and remove A pillar trim.
4. Remove loudspeaker grille and upper part of facia. Unplug solar sensor connector in cars with ACC.
5. Fully open the glove compartment flap by bending the link arms to release the stops. Pull down the glove compartment light inside the glove

compartment.

Cars equipped with passenger airbag:
Remove the upper part of the facia.

6. Remove the glove compartment together with the facia vent by undoing the six screws, Using a screwdriver, carefully pry along the facia vent.

Note the position of the clip. Detach cables from glove compartment lamp and the lighting switch.

7. Detach the electrical distribution box and move it down.
8. Remove the ashtray.

Air Leakage, Sealing|Page 5093 > < Air Leakage, Sealing|Page 5091