9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
27. Lift down the combined instrument.
CAUTION: Protect the glass so that it is not scratched.
28. Remove the air duct and the left-hand and right-hand defroster vents.
29. Undo the screws and lift away the air duct which goes to the rear floor.
30. Unscrew the plastic holder securing the wiring loom under the heater housing.
31. Unplug connectors for servomotor, fan motor and blended air sensor (cars with ACC only).
32. Remove the floor vents.
33. Remove screws in heater housing.
34. Detach clips from engine compartment and move cable entry to one side.
35. Lift the housing diagonally up. The underpart is located in a groove between the bulkhead and the facia subframe.
Heater Housing, Installation
