9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Robinair 17644 Draining Equipment And Robinair 10094 Vacuum Pump
CAUTION: Draining and charging equipment for R134a refrigerant must, under no circumstances, be used for R12 refrigerant or vice versa. Only small
amounts of the wrong refrigerant or the wrong compressor oil will give rise to chemical reactions which will eventually ruin both the equipment and the
car's A/C system.
NOTE: The system must be drained on both the low-pressure and high-pressure sides at the same time. A non-return valve in the intake to the
low-pressure side of the compressor makes it impossible to drain one side only.
1. Open the red cock ("Gas") for gaseous refrigerant on the draining station's container.
2. Connect the yellow hose on the pressure gauge stand's middle outlet to the inlet side of the draining station.
3. Connect the blue low-pressure hose, using a snap-on coupling, to the low-pressure side of the compressor.
4. Connect the red high-pressure hose, using a snap-on coupling, to the high-pressure side of the compressor.
5. Open the valves on both snap-on couplings by screwing in the knobs.
