saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Compressor Oil - Topping Up and Adjusting For R12|Page 5146 > < Compressor Oil - Topping Up and Adjusting For R12|Page 5144
Page 3
background image

13

Plug in the connector. Check that the cables do not rub against the pulley.

14

Remove the plugs from the compressor and hoses. Check that there is no dirt in the connections.
Install hoses to compressor.

Tightening torques:

Pressure hose: 32.5 Nm (24 lbf ft)

Vacuum hose: 37.5 Nm (27.8 lbf ft)

15

Fill the system with refrigerant. See "Refrigerant".

16

Carry out a performance test.

Compressor Oil - Topping Up and Adjusting For R12|Page 5146 > < Compressor Oil - Topping Up and Adjusting For R12|Page 5144