saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fan Motor, Changing (With A/C)|Page 4862 > < Fan Motor, Changing (With A/C)|Page 4860
Page 1
background image

Ventilation Fan: Service and Repair
Fans In Rear Doors, Changing

Removal:

1. Remove the rear door trim.
2. Fold the sound insulation out of the way.
3. Remove the air intake grille and the air outlet grille.
4. Remove the rear door fan.

Installation:

1. Fit the rear door fan in the side of the door.
2. Fit the air intake, grille and the air outlet grille.
3. Fold back the sound insulation.
4. Plug in the connector and tie the rear door trim on the inside of the door.
5. Calibrate the ACC system by pressing the "AUTO" and "VENT" buttons at the same time.

NOTE:  During calibration, all previously stored diagnostic trouble codes are erased. Before carrying out calibration, all stored diagnostic trouble
codes should be read,

Fan Motor, Changing (With A/C)|Page 4862 > < Fan Motor, Changing (With A/C)|Page 4860