9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Ventilation Fan: Service and Repair
Fan Motor, Changing (With A/C)
To Remove
1
Detach the negative lead from the battery.
2
Remove:
Hood if necessary
Wiper arms
Covers over evaporator casing and wiper motor
Plastic protector under windscreen moulding
3
Detach the seal strip from the bulkhead panel. Lift off the signal converter.
4
Remove the bulkhead panel.
5
Remove the screws and move the electronic control module to one side.
6
Remove the lead through panel from the bulkhead panel. 4 screws.
7
Cut the cable tie. Unplug the connectors and remove the complete wiper mechanism.
8
Drain several liters of coolant from the cooling system. Remove the rubber cable gland around the coolant hoses. Remove the quick connect
connector for the coolant hoses in the heat exchanger.
9
Remove the screws and move the vacuum pump for the cruise control to one side, if installed.
