saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fuel Line Non-Return Valve - Dimension Change|Page 2700 > < Fuel Line Non-Return Valve - Dimension Change
Page 2
background image

Repair/Action code: 02

Labor Operation (US): 24141.5

Procedure

WARNING

As removing the fuel pump involves working on the car's fuel system, the following points must be observed:

^

Ensure that there is good ventilation! If an approved ventilation system for extracting fuel vapor is available, it should be used.

^

Wear protective gloves! Prolonged exposure of the hands to fuel can cause irritation of the skin.

^

Ensure that a class BE fire extinguisher is on hand! Be alert to the danger of sparks, e.g. on circuit breaking, short-circuiting etc.

^

Absolutely No Smoking!

^

Release the pressure in the fuel system by opening the nipple on the fuel rail Use a paper towel or cloth to soak up any escaping fuel. Retighten
the nipple.

1

5D/CS: Lift out the parcel shelf, lift up the rear seat cushion and lower the backrest.

CD: Lift up the rear seat cushion and remove the backrest.

2

Remove the cover strip from behind the rear seat.

3

Fold back the rear section of the luggage-compartment floor. Remove the two screws and lift out the floor panel.

4

Remove the screws in the pump cover plate and move it out of the way.

Fuel Line Non-Return Valve - Dimension Change|Page 2700 > < Fuel Line Non-Return Valve - Dimension Change