9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Throttle Position Sensor: Service and Repair
NON-ETS
To Remove
1. Unplug the position sensor connector.
2. Disconnect the large-diameter crankcase breather hose from the throttle body.
3. Remove the position sensor retaining screws and remove the sensor.
To Fit
1. Make sure that the O-ring is correctly positioned and fit the sensor on the throttle spindle. Tighten the retaining screws.
2. Reconnect the large-diameter crankcase breather hose.
3. Plug in the connector