saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Checking the Battery|Page 4234 > < Technician Safety Information|Page 4231
Page 1
background image

Battery: Testing and Inspection
Checking the Battery

1

Use a voltmeter to check that a reading of at least 12.4 V is obtained across the battery terminals.

If the voltage is too low it indicates that the battery is either poorly charged or has insufficient capacity.

The battery's state of charge should be checked. The most suitable way of doing this is to use a hydrometer. The specific gravity of the electrolyte
in a fully-charged battery should be 1.28. A specific gravity of 1.18 corresponds to about 50% of a full charge.

Checking the Battery|Page 4234 > < Technician Safety Information|Page 4231