9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Neutral Safety Switch: Service and Repair
CAUTION: On air bag equipped vehicles, refer to Air Bags (Supplemental Restraint Systems), Service Precautions. See: Restraint Systems/Air
Bag Systems Also refer to Service and Repair, Arming and Disarming.
1. Disconnect battery ground cable.
2. Loosen locknut and remove shift knob, and remove shift indicator plate and top cover after disconnecting indicator lamp.
3. Pull carpet back from shifter cover assembly.
4. Remove rear ashtray and five screws securing center rear console.
5. Disconnect wiring harness connectors and remove console.
6. Disconnect wiring harness connectors to switch assembly.
7. Remove screws securing switch to shifter assembly, then the switch.
8. Place transaxle selector in neutral and install switch with screws finger tight.
9. Rotate switch until line on switch is aligned with lever, and secure switch.
10. Reconnect wiring harness connectors and reverse procedure to install remaining components.
