9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Suspension Spring ( Coil / Leaf ): Tools and Equipment
1. To produce the tool use a pair of pipe grips with a minimum opening of 35mm and a piece of water pipe.
2. Saw of a section of pipe with an inner diameter of approximately 27 mm and a thickness of 3 - 4 mm. The length should be 20 mm.
3. Saw the pipe in two equal sized halves.
4. Set the pipe halves in a vice so that they sit edge to edge on one side.
5. Weld the two pipe halves together.
