Suspension Strut / Shock Absorber Replacement - 9000 Hatchback (1994)
INSTALLATION
IMPORTANT: Washer and bush positions, see figure.
1. Slip the upper damper bracket in the hole in the body.
2. Fit the damper to the lower fastening.
Tightening torque: 85 Nm (63 ft. lbs.)
3. Replace the road wheel.
4. Lower the car.
5. Tighten the wheel studs to 120 Nm (89 ft. lbs.)
6. Fit the bush, washer and nut to the upper mounting.
Tightening torque: 15 Nm (11 ft. lbs.)
IMPORTANT: Washer and bush positions, see figure.
7. Re-fit the carpeting and return the luggage compartment to its original condition.
8. Replace the parcel shelf, if necessary.
Rear Damper Rubber Bush (Bushing)
