9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
2.
Connect the angled end of one of the spare hoses from the filtering kit to the supply connection (A) on the transmission housing, Figure 3.
Connect the other end of the same spare hose to the cars original return hose (from connection B) using the long banjo bolt, 3 washers and cap nut
supplied.
3.
Connect the car's original supply hose (from Connection A) to the side of the filter adapter, Figure 4.
4.
Connect the angled end of the other spare hose to the return connection (B) on the transmission, Figure 3.
Connect the other end of the same spare hose to the top of the filter adapter, Figure 4.
NOTE
On cars not equipped with a thermostat, skip step 5 and proceed to step 6.
5.
Connect the electrical harness as follows, Figure 5:
Yellow wire with female spade to the temperature sensor on the filter housing.
Black wire with female spade to the ground lug on the filter adapter.
