saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/T - ATF Filtering Kit|Page 3073 > < Fluid - A/T|Capacity Specifications|Page 3068
Page 1
background image

Fluid Filter - A/T: Technical Service Bulletins
A/T - ATF Filtering Kit

CATEGORY 
Transmission

SECTION 
4

PAGE 
11

ISSUE 
12/92-0281

CODE 
440

Subject:
ATF Filtering Procedure

Application:
9000 Models with ZF Automatic Transmission

Supersedes 05/88-1057

When replacing a 9000 automatic transmission is replaced, the ATF in the cooling circuit must be filtered to avoid possible contamination of the new
transmission. A filtering kit, P/N 87 91 824, was designed specifically for this purpose and uses a standard Saab long-life engine oil filter. When
installed, the filtering kit will reverse the flow of ATF (see Figures 1 and 2) through both of the coolers and thermostat, where equipped. The ATF will
then pass through the filter before being returned to the transmission.

CAUTION

If a car is found to have coolant mixed with the transmission fluid, all transmission cooling circuit components must be removed and flushed with

A/T - ATF Filtering Kit|Page 3073 > < Fluid - A/T|Capacity Specifications|Page 3068