9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
5. Turn the lower part of the valve body upside down.
-
Remove the two screws on the little cover which secure the accumulator housing.
-
Then turn back the lower part of the valve body.
6. Remove the three screws securing the accumulator housing to the lower part of the valve body.
7. Remove the accumulator housing from the lower part of the valve body.
NOTE: There is a guide pin between the accumulator housing and the lower part of the valve body.
8. Remove the two clips from the underside of the accumulator housing.
9. Remove the outer and inner throttle valve and the spring.
10. Remove the selector arm.
11. Turn the entire lower part of the valve body upside down.
12. Remove the two screws securing the separator plate and the small cover to the lower part of the valve body.
