9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
equivalents.
-
Install the screws and tighten the three screws in the middle alternately with a torque of 33-43 Nm (24-32 ft. lbs.).
-
Note that the outermost screw should only be tightened with 20-28 Nm (15-21 ft. lbs.).
5. Install the first and second gears' gear wheels with their synchromesh unit (which have previously been assembled,) on the output shaft with
assembly tool No. 87 92 103, or equivalent.
-
Install the third gear's gear wheels and spacing sleeve on the output shaft.
-
Do not let the installed gear wheels come too far down the shaft, leave 15 mm, otherwise it will not be possible to install the input shaft.
6. Place the input shaft in the case.
-
Install a suitable tie strap to keep the teeth of the input and output shafts engaged.
