9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
Reverse gear driver (gearbox
No. J53207 and earlier; groove
0.5 mm wider)
87 40 151
Complete reverse gear
87 43 460
Tools:
Press sleeve
87 92 475*
* Available for purchase from Kent-Moore by calling the Kent-Moore order desk at 1-800-345-2233.
Action 1
1.
Remove the transmission. Refer to Service Manual 4:1, "Manual gearbox."
2.
Remove the end cover and main case as described in Service Manual 4:1.
3.
Remove the reverse gear lever (see item 1, Figure 2).
4.
Measure the reverse gear lever (Figure 3). If the dimensions are not as indicated, install a new lever, P/N 87 35 102.
CAUTION
Molybdenum particles can damage the gearbox. Check to see if molybdenum flakes from the synchromesh baulk ring have fastened on the
synchromesh cone or if molybdenum particles have flaked off the synchromesh baulk ring (see item 1, Figure 4).