900 S Convertible L4-2290cc 2.3L DOHC (1996)
15.
Fit the lock mechanism to the Tonneau cover. Ensure that the pin on the locking tongue lies against the wire guides for the access flaps.
16.
Reconnect the connector on the microswitch. Fit a new cable tie.
17.
Connect the harness in the pants kit to the new motor.
18.
Place the motor on the Tonneau cover. Guide the cable behind the motor bracket and out on the left side of the car.
19.
Fit the motor and screw the impact safety wires to the top bolts of the motor bracket.
Tightening torque: 7 Nm (5.2 lbf ft)
