900 S Convertible L4-2290cc 2.3L DOHC EFI (1997)
2. Install the differential shaft.
3. Tap in the locking pin in the differential shaft.
4. Install the final gear wheel with new screws.
-
Tighten alternately to 60-70 Nm (47-55 ft. lbs.)
2. Install the differential shaft.
3. Tap in the locking pin in the differential shaft.
4. Install the final gear wheel with new screws.
-
Tighten alternately to 60-70 Nm (47-55 ft. lbs.)