900 S Convertible L4-2290cc 2.3L DOHC EFI (1997)
Action:
18.
To adjust the bearing tension, see Service Manual Section 4:1 Manual gearbox.
19.
The following must be done before taking measurements:
^
Input shaft bearing fitted (axial clearance 0.04-0.16 mm)
^
Differential fitted (axial clearance 0.05-0.20 mm)
^
All bearings oiled
^
The gearbox must be in the same position as in the car (horizontal)
20.
Fit the hose between tool 87 91 428 and the hexagonal socket. Make sure that no gear is engaged.