900 S Convertible L4-2290cc 2.3L DOHC EFI (1997)
Heated Glass Element: Customer Interest
Rear Defroster Grid - Tab Separation
SI No. 811-1984
PI No.
Date: January 2000
Distr. all
900
Replacing connecting tab on electrically heated rear window
Cars affected
Saab 900 M95-M98 CV
Background
Previously, when the connecting tab on the electrically heated rear window had come loose, it was necessary to replace the entire rear window. It is now
possible to fit a new connecting tab instead by using conductive adhesive.
Parts required
51 82 985 Connecting tab (CA: 30582153)
02 63467 2-part Conductive epoxy* (or similar conductive epoxy containing silver)
30 15815 Cleaner, Teroson FL 875 (CA: 30559941)
Abrasive cloth, grade P1200
Hot-air gun
*Each dealer was shipped one package of this epoxy in July, 1996.
Procedure
This service information assumes that fault diagnosis has been carried out and that the cause of the fault has been located to the electrically heated rear
window connecting tab being loose. Always check both connecting tabs. The following instructions apply to replacing one connecting tab. If both tabs
require replacement, this should be carried out at the same Time.
! WARNING
This procedure involves the use of corrosive adhesive that emits harmful fumes and can irritate eyes and skin.
Therefore, perform the necessary safety procedures:
^
Use protective gloves.
^
Provide good ventilation.
