900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Main and Dipped Beams
Lamps
1
Check that fuses 6-9 in the front main fuse box in the engine bay are intact and live.
If they are not, proceed to point 4.
2
Check that the bulbs are OK and that they are supplied with 12 V, as follows:
-
between connector pin 2 and a good grounding point for dipped beam.
-
between connector pin 1 and a good grounding point for main beam.
-
Also check that the resistance across connector pin 4 and a good grounding point is < 1 ohm.
3
If the power supply does not reach pin 1 or pin 2, check the wiring between the fuse and the lamp for continuity/shorting.
4
Plug in the Intelligent Saab Tester (ISAT) scan tool and select "READ FAULT CODES" from the menu. If any diagnostic trouble codes are
present, continue in Trouble Code Tables.