900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Clutch Pedal Assembly: Service and Repair
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Removal
1. Drain the clutch system brake fluid via the bleed nipple on the slave cylinder using bleed unit tool No. 88 19 096, or equivalent.
2. Disconnect the electrical connection to the anti-theft alarm's hood switch, if installed.
3. Remove the main fuse box and place it aside.
4. Disconnect the supply hose from the master cylinder.
5. Undo the clip securing the delivery pipe adjacent to the master cylinder.
6. Withdraw the delivery pipe.
7. From the engine bay, undo the nut securing the righthand part of the clutch pedal bracket to the bulkhead partition.
