900 S Coupe L4-2290cc 2.3L DOHC (1995)
16.
Slightly loosen the two screws securing the contact unit.
17.
Press the contact roller in the direction of the arrow with a screwdriver. Tighten the screws securing the contact unit.
18.
Screw on the cover. Make sure the rubber seat is positioned correctly.
19.
Refit the antenna in the fender (wing). Make sure to tighten the top nut before fastening the bracket. This will ensure a good ground connection.
20.
Check the function of the antenna. Wipe the antenna rod clean with a dry cloth when it is completely extended.
Note
Do not use oil or silicon-based cleaning agents.