900 S Coupe L4-2290cc 2.3L DOHC (1995)
Also inspect grounding point G3S visually, unscrew and clean the contact surfaces. Reconnect the grounding point and battery cable, and repeat
point 1.
Checking the ICE Data
1
Connect a SAT Scan Tool and select "READ VALUES" followed by "DATA FROM ICE".
2
By proceeding as described below it is possible to simulate faults so that the ICE will send corresponding messages to the SID unit. Readouts of
these messages can be obtained with the ISAT Scan Tool.
A Remove a rear parking light bulb and switch on the parking lights.
B Remove a brake light bulb and depress the brake pedal.
C Switch on the ignition. On depressing the brake pedal the signal should go away.
Checking the Power Supply
1
Check that fuses 17 and 34 are intact and live.
